yigogl.blogg.se

Toyota starlet 1984
Toyota starlet 1984







Toyota Starlet II (P60) Facelift 1984 1.3 Typical tyre pressure - 27 PSI (1.8 bar). Thus, all discs are mounted on four bolts and the distance between them is exactly one hundred fourteen point and 30 hundredths millimeters. In this case, the bolt pattern is the same for all types of wheels - 4x114.3. It is not possible to list all the options. The choice of disks is huge, you can find copies with the same parameters, but with a offset size of 1-2 millimeters more or less. Or fit wheels of the same width, but of a larger diameter, which is quite popular among car owners. For example, discs that are wider than the same diameter. Although there may be other options that we have not described in the table. What non-standard sizes can be fitted? Please refer to the table above for possible alternative sizes for tuning. Using the recommended tire sizes will help to avoid problems with driving management, safety and other difficulties.

  • S - the maximum allowable vehicle speed of 180 km/h.
  • 75 - the maximum allowable amount of weight the tire can carry 387 kg.
  • The load index is a two or three-digit number, the speed index is indicated by Latin letters, e.g. In addition, information about its carrying capacity and speed parameters - load index and speed index - can be applied to rubber.
  • 0 - profile height in percentage of its width.
  • toyota starlet 1984 toyota starlet 1984

    145 - PROFILE width (cross section of the tyre) in millimetres.

    toyota starlet 1984

    Vehicle tyre markings 145/0 R0 are deciphered as follows:

  • ET45 - offset of the disk in millimeters.
  • 13" - fitting rubber diameter in inches.
  • The Toyota Starlet II (P60) Facelift 1984 1.0 is fitted with 5Jx13 ET45 rims with tires 145/0 R0 75S as standard. What wheels sizes are recommended by the manufacturer Wheel bolt pattern options PCD (Pitch Circle Diameter) Toyota Starlet II (P60) Facelift 1984 1.0









    Toyota starlet 1984